TurboMax blower will reduce your power cost by 30-40% compared to traditional blower. It contributes to reducing carbon emissions.
Since oil for lubrication and cooling is not used, there is no risk of environmental pollution due to oil treatment.
Because it is a low-noise and vibration-free product, it minimizes resource consumption of building materials and costs for soundproofing and dustproofing.
30-40% less energy consumption than PD blowers
Recover the initial investment expenses within a short period of 2 to 3 years.
High-speed driving, high-efficiency design.
zero power transmission loss by the direct connection
Only regular inlet filter replacement is required
Automatic error check and communication
No extra anti-vibration or anchor bolts installation required
Minimization of installation time.
Intuitive User-friendly interface design
Variable Control Mode
Low noise and no vibration below 85dB(A).
Oil Free Lubrication System.
30-40% less energy consumption than PD blowers
Recover the initial investment expenses within a short period of 2 to 3 years.
High-speed driving, high-efficiency design.
zero power transmission loss by the direct connection
Only regular inlet filter replacement is required
Automatic error check and communication
No extra anti-vibration or anchor bolts installation required
Minimization of installation time.
Intuitive User-friendly interface design
Variable Control Mode
Low noise and no vibration below 85dB(A).
Oil Free Lubrication System.
RMX Series | MAX Series | ||
---|---|---|---|
Capacity | 10 to 125hp | 10 to 1000hp | |
Pressure Range | 0.6 ~ 0.8 kgf/cm2 | 0.4 ~ 1.5 kgf/cm2 | |
Controller | 16 bit Mi-Com | 32 bit Mi-Com | PLC(Allen Bradley, Siemens) |
HMI | 7" | 7" | 7" |
VFD | Seoho | Yaskawa or Vacon | |
Voltage Range | 200V,380~440V | 200V,380~500V | |
Communication | Analog(4-20mA) | Analog(4-20mA) | |
Modbus RTU(RS485) | Modbus RTU(RS485) | ||
Modbus TCP | Modbus TCP | ||
Ethernet IP | |||
Profibus DP | |||
Profibus Net | |||
Control Mode | RPM | RPM | |
Flow | Flow | ||
Power | Power | ||
Pressure | Pressure | ||
Proportional | Proportional | ||
DO | DO | ||
Time | Time | ||
Idling | |||
Trend Data Extraction | No | Yes | |
Flange | KS->JIS,ANSI,DIN | ||
Optional Enclosure Type | Suction Flange Type | Suction Flange, Separated, Outdoor | |
Customization | N/A | Bespoke | |
Conformity | CE | CE,UL |
Headquarters : 208, Osongsaengmyeong 9-ro, Osong-eup, Heungdeok-gu, Cheongju-si, Chungcheongbuk-do, Republic of Korea
Hyeondo Factory : 12-21, Jugamdowon-ro, Hyeondo-myeon, Seowon-gu, Cheongju-si, Chungcheongbuk-do, Republic of Korea
TEㅣ : +8243-275-6002, FAX : +8243-275-6004